Maze Customs:Major mods
Navigation: | Main Page → Items → Weapons → Maze Customs → Major mods |
This page is actively under construction! Please ask the following users for permission before editing this page: Tempest I will transpose everything from this onto this page. I will probably also change and modify certain mods and offerings as well. |
Maze Customs major mods are all of the modifications offered to what are known as Customs weapon families or simply Customs families. A family regroups certain weapons with the same or compatible operating principles; for example, all members of the AK family are based in some form on the Kalashnikov rifle.
There are 11 Customs families in total. Each one, alongside all of the available modifications, will be described in their own section below. In addition to the modifications unique to each family, there also exist Universal modifications, which can be applied to most firearms, regardless of whether they belong to a Customs family or not.
Contents
1911 Single Stack (1911SS)
A semi-automatic pistol platform based on the classic 1911 design. The most famous example is the Colt M1911A1, chambered in .45 ACP.
1911SS pistols are recognizable by their slim frame, distinctive style and design, and their use of single-stack magazines.
Any full-size firearm based on the 1911 design and using single-stack magazines is considered to be part of the 1911SS family, even if minute details (hammer, beavertail, rounded or square butt, style and type of iron sights...) may differ.
Base models (1911SS)
Customs family: 1911SS | |
---|---|
.45 ACP models | Colt M1911A1 |
10x25mm Auto models | Colt Delta Elite |
.357 SIG models | SIG Sauer 1911 Fastback Nightmare |
9x19mm Parabellum models | Springfield 1911RO Target |
All base models are Class 3, Weight 3.
Modifications available (1911SS)
Rechambering (1911SS)
All rechambering services cost 200.
Barrel (1911SS)
Barrel length configurations
Configuration name | Barrel length | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
Full size | 5 inches | None | Colt Delta Elite Colt M1911A1 SIG 1911FN |
100 | Original 5 inch barrel. |
Longslide | 7 inches | Weight +1 tier | 200 | Installs an 7 inch barrel and matching long slide. |
Barrel porting
Configuration name | Effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Unported barrel | None | Colt Delta Elite Colt M1911A1 SIG 1911FN |
50 | Original, unmodified barrel. |
Ported barrel | Recoil -1 Silencers are rendered ineffective |
450 | See note 1 |
Fire control (1911SS)
Configuration name | Fire modes | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Original | Semi-auto | Colt Delta Elite Colt M1911A1 SIG 1911FN |
50 | Original semi-automatic configuration. |
Lebman mod | Full-auto only, AutoROF 8 Weapon category becomes Auto pistol (or Submachine gun if the Inglis stock is also installed) |
200 | Converts the firearm to full-auto only. Rate of fire ~1000 RPM. |
Frame (1911SS)
Configuration name | Effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Original frame | N/A | Colt Delta Elite Colt M1911A1 SIG 1911FN |
50 | Original pistol configuration. |
Rail Gun frame | Light mounts: 1x Short interface | 150 | Replaces the frame with a railed model. | |
Lebman frame | Underbarrel: Integrated foregrip | 150 | Replaces the frame with a unique model fitted with a Thompson-inspired foregrip. |
Optics (1911SS)
Configuration name | Optics | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Iron sights | None | Colt Delta Elite Colt M1911A1 SIG 1911FN |
50 | Original iron sights, no optics or mounts. |
Integrated RDS | Integrated red dot sight | 700 | Installs a slide fitted with an integrated red dot sight. | |
Integrated RFX | Integrated reflex sight | 950 | Installs a slide fitted with an integrated reflex sight. | |
Scope rail | NATO-S mount | 1100 | Installs a special black plastic grip panel which extends over the slide, providing a rail that can be fitted with certain optics. |
Stock (1911SS)
Configuration name | Stock type | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
No stock | N | None | Colt Delta Elite Colt M1911A1 SIG 1911FN |
50 | Original pistol configuration. |
Inglis stock | S | Weapon becomes Class 2 Weight +1 tier Weapon category becomes Conventional rifle (or Submachine gun if the Lebman mod is also installed) |
150 | Attaches a fixed wooden stock to the pistol, transforming it into a short carbine. |
1911 Double Stack (1911DS)
A semi-automatic pistol platform that is based on a modified version of the classic 1911 design, featuring a larger frame that can accomodate higher-capacity, double-stack magazines.
Any full-size firearm based on the 1911 design and using double-stack magazines is considered to be part of the 1911DS family, even if minute details (hammer, beavertail, rounded or square butt, style and type of iron sights...) may differ.
Base models (1911DS)
Customs family: 1911DS | ||
---|---|---|
.45 ACP models | Para Ordnance P-14.45 | |
.40 S&W models | Para Ordnance P-16.40 | |
9x19mm Parabellum models | Para Ordnance P-18.9 |
All base models are Class 3, Weight 3.
Modifications available (1911DS)
Rechambering (1911DS)
All rechambering services cost 200.
Caliber | Compatible magazines | Corresponding base models |
---|---|---|
.45 ACP | P-14 magazines | Para P-14 |
.40 S&W | P-16 magazines | Para P-16 |
.357 SIG | P-16 magazines | |
10x25mm Auto | P-16 magazines | |
.460 Rowland | P-14 magazines | |
7.62x25mm Tokarev | Custom 1911DS Tokarev magazines | |
9x19mm Parabellum | Custom 1911DS 9mm magazines | |
9x25mm Dillon | P-16 magazines |
Barrel (1911DS)
Barrel length configurations
Configuration name | Barrel length | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
Full size | 5 inches | None | Para P-14 Para P-16 |
100 | Original 5 inch barrel. |
Longslide | 7 inches | Weight +1 tier | 200 | Installs an 7 inch barrel and matching long slide. |
Barrel porting
Configuration name | Effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Unported barrel | None | Para P-14 Para P-16 |
50 | Original, unmodified barrel. |
Ported barrel | Recoil -1 Silencers are rendered ineffective |
450 | See note 1 |
Fire control (1911DS)
Configuration name | Fire modes | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Original | Semi-auto | Para P-14 Para P-16 |
50 | Original semi-automatic configuration. |
Lebman mod | Full-auto only, AutoROF 8 Weapon category becomes Auto pistol (or Submachine gun if the Inglis stock is also installed) |
200 | Converts the firearm to full-auto only. Rate of fire ~1000 RPM. |
Frame (1911DS)
Configuration name | Effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Original frame | N/A | Para P-14 Para P-16 |
50 | Original pistol configuration. |
Rail Gun frame | Light mounts: 1x Short interface | 150 | Replaces the frame with a railed model. | |
Lebman frame | Underbarrel: Integrated foregrip | 150 | Replaces the frame with a unique model fitted with a Thompson-inspired foregrip. |
Optics (1911DS)
Configuration name | Optics | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Iron sights | None | Para P-14 Para P-16 |
50 | Original iron sights, no optics or mounts. |
Integrated RDS | Integrated red dot sight | 700 | Installs a slide fitted with an integrated red dot sight. | |
Integrated RFX | Integrated reflex sight | 950 | Installs a slide fitted with an integrated reflex sight. | |
Scope rail | NATO-S mount | 1100 | Installs a special black plastic grip panel which extends over the slide, providing a rail that can be fitted with certain optics. |
Stock (1911DS)
Configuration name | Stock type | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
No stock | N | None | Para P-14 Para P-16 |
50 | Original pistol configuration. |
Inglis stock | S | Weapon becomes Class 2 Weight +1 tier Weapon category becomes Conventional rifle (or Submachine gun if the Lebman mod is also installed) |
150 | Attaches a fixed wooden stock to the pistol, transforming it into a short carbine. |
Blackhawk
A single-action revolver platform, patterned after the Ruger Blackhawk. Blackhawks are considered to be among the toughest and most durable single-action revolvers ever made, allowing them to be chambered in a wide variety of pistol calibers, from .22 Long Rifle to .454 Casull and nearly everything in between.
Blackhawk revolvers, like other single-action revolvers, can be reloaded using speed strips.
Base models (Blackhawk)
Customs family: Blackhawk | ||
---|---|---|
.30 Carbine models | Ruger Blackhawk | |
.44 Magnum models | Ruger Super Blackhawk |
All base models are Class 3, Weight 5.
Modifications available (Blackhawk)
Rechambering (Blackhawk)
When rechambering a Blackhawk, you must select both a caliber and a cylinder capacity. Double-caliber cylinders (e.g. .357 Magnum / .38 Special) may accept both listed cartridges interchangeably.
All rechambering services cost 200.
Caliber | Cylinder capacities | Corresponding base models |
---|---|---|
.30 Carbine | 5 rounds 6 rounds 7 rounds 8 rounds |
Ruger Blackhawk |
.44 Magnum / .44 Special | 5 rounds 6 rounds |
Ruger Super Blackhawk |
.44 Special only | 5 rounds 6 rounds |
|
.357 Magnum / .38 Special | 5 rounds 6 rounds 7 rounds 8 rounds |
|
.38 Special only | 5 rounds 6 rounds 7 rounds 8 rounds |
|
.380 ACP | 5 rounds 6 rounds 7 rounds 8 rounds |
|
.40 S&W | 5 rounds 6 rounds 7 rounds |
|
.45 ACP | 5 rounds 6 rounds |
|
.454 Casull / .45 Colt | 5 rounds 6 rounds |
|
.45 Colt only | 5 rounds 6 rounds |
|
.460 Rowland | 5 rounds 6 rounds |
|
7.62x25mm Tokarev | 5 rounds 6 rounds 7 rounds 8 rounds |
|
9x18mm Makarov | 5 rounds 6 rounds 7 rounds 8 rounds |
|
9x19mm Parabellum | 5 rounds 6 rounds 7 rounds 8 rounds |
|
10x25mm Auto | 5 rounds 6 rounds 7 rounds |
|
.22 Long Rifle | 6 rounds 8 rounds 10 rounds |
Note: In single-action revolvers such as Blackhawks, rimless cartridges headspace on the case mouth. A cylinder chambered for a rinless cartridge can therefore only accept that specific cartridge and none other, even if a double-action revolver chambered in the same cartridge would also accept a shorter version (e.g. a Blackhawk revolver with a 10x25mm Auto cylinder cannot accept .40 S&W). This is because the shorter cartridges would simply fall a certain depth into the cylinder, preventing the firing pin from hitting the primer and therefore firing the cartridge.
Barrel (Blackhawk)
Barrel length configurations
Configuration name | Barrel length | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
Snub-nose | 2.5 inches | Weight -2 tiers | 500 | Installs a short 2.5 inch barrel with corresponding front sight. | |
Vaquero | 4.62 inches | Weight -1 tier | 400 | Installs a medium-length 4.62 inch barrel with corresponding front sight, patterned after the Ruger Vaquero. | |
Standard | 7.5 inches | None | Ruger Blackhawk Ruger Super Blackhawk |
200 | Installs a long 7.5 inch barrel with corresponding front sight. |
Long barrel | 10.5 inches | None | 400 | Installs a long 10.5 inch barrel with corresponding front sight. | |
Super Buntline | 12.5 inches | Weight +1 tier | 500 | Installs a super-long 12 inch barrel with corresponding front sight, inspired by the Buntline Special. |
Frame (Blackhawk)
Configuration name | Effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Original frame | N/A | Ruger Blackhawk Ruger Super Blackhawk |
50 | Original revolver configuration. |
Laser grip | Lights: Integrated laser sight | 400 | Installs rubber grips fitted with a laser sight module. |
Optics (Blackhawk)
Configuration name | Optics | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Iron sights | None | Ruger Blackhawk Ruger Super Blackhawk |
50 | Original iron sights, no optics or mounts. |
Integrated scope | Integrated 2x scope | 1000 | The top of the receiver is drilled and tapped to fit a permanent mount, on which a 2x scope is installed. Not compatible with: Snub-nose barrel configuration | |
Scope rail | NATO-S mount | 1500 | Installs a barrel-mounted length of rail, sitting onto the top of the receiver and the barrel. Not compatible with: Snub-nose barrel configuration |
Stock (Blackhawk)
Configuration name | Stock type | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
No stock | N | None | Ruger Blackhawk Ruger Super Blackhawk |
50 | Original pistol configuration. |
Wire stock | S | Weapon becomes Class 2 Weight +1 tier Weapon category becomes Conventional rifle |
150 | Attaches a fixed metallic wire stock to the grips, providing a rudimentary stock and turning the revolver into a carbine. |
Redhawk
A double-action/single-action revolver platform, patterned after the Ruger Redhawk. Just as Blackhawks are considered to be among the most durable single-actions ever made, Redhawks are considered to be some of the strongest and toughest DA/SA revolvers ever made. They can be chambered in the same wide variety of cartridges as their single-action counterparts.
Base models (Redhawk)
Customs family: Redhawk | ||
---|---|---|
.45 Colt models | Ruger Redhawk | |
.454 Casull models | Ruger Super Redhawk, Ruger Super Redhawk Alaskan |
All base models are Class 3, Weight 5, except for the Super Redhawk Alaskan, which is Weight 2 due to its barrel length.
Modifications available (Redhawk)
Rechambering (Redhawk)
When rechambering a Redhawk, you must select both a caliber and a cylinder capacity. Double-caliber cylinders (e.g. .357 Magnum / .38 Special) may accept both listed cartridges interchangeably.
All rechambering services cost 200.
Caliber | Rimless? | Cylinder capacities | Corresponding base models |
---|---|---|---|
.454 Casull / .45 Colt | |
5 rounds 6 rounds |
Ruger Super Redhawk, Ruger Super Redhawk Alaskan |
.45 Colt only | |
5 rounds 6 rounds |
Ruger Redhawk |
.30 Carbine | |
5 rounds 6 rounds 7 rounds 8 rounds |
|
.357 Magnum / .38 Special | |
5 rounds 6 rounds 7 rounds 8 rounds |
|
.38 Special only | |
5 rounds 6 rounds 7 rounds 8 rounds |
|
.380 ACP | |
5 rounds 6 rounds 7 rounds 8 rounds |
|
.44 Magnum / .44 Special | |
5 rounds 6 rounds |
|
.44 Special only | |
5 rounds 6 rounds |
|
.460 Rowland / .45 ACP | |
5 rounds 6 rounds |
|
.45 ACP only | |
5 rounds 6 rounds |
|
7.62x25mm Tokarev | |
5 rounds 6 rounds 7 rounds 8 rounds |
|
9x18mm Makarov | |
5 rounds 6 rounds 7 rounds 8 rounds |
|
9x19mm Parabellum | |
5 rounds 6 rounds 7 rounds 8 rounds |
|
10x25mm Auto / .40 S&W | |
5 rounds 6 rounds 7 rounds |
|
.40 S&W only | |
5 rounds 6 rounds 7 rounds |
|
.22 Long Rifle | |
6 rounds 8 rounds 10 rounds |
Note: The table above indicates whether the selected cartridges are rimless or not. If your Redhawk revolver is chambered for a rimless cartridge, moon clips of matching caliber and capacity are required to reload them (you cannot use loose rounds). Otherwise, you can use speedloaders of matching caliber and capacity, speed strips of matching caliber, or simply reload them with loose rounds.
Barrel (Redhawk)
Barrel length configurations
Configuration name | Barrel length | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
Snub-nose | 2.5 inches | Weight -2 tiers | Ruger Super Redhawk Alaskan | 500 | Installs a short 2.5 inch barrel with corresponding front sight. |
Combat | 4.25 inches | Weight -1 tier | 400 | Installs a medium-length 4.25 inch barrel with corresponding front sight, patterned after the Ruger Vaquero. | |
Standard | 7.5 inches | None | Ruger Redhawk Ruger Super Redhawk |
200 | Installs a long 7.5 inch barrel with corresponding front sight. |
Long barrel | 9.5 inches | None | 400 | Installs a long 9.5 inch barrel with corresponding front sight. | |
Super Buntline | 12.5 inches | Weight +1 tier | 500 | Installs a super-long 12 inch barrel with corresponding front sight, inspired by the Buntline Special. |
Frame (Redhawk)
Configuration name | Effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Original frame | N/A | Ruger Redhawk Ruger Super Redhawk Ruger Super Redhawk Alaskan |
50 | Original revolver configuration. |
Laser grip | Lights: Integrated laser sight | 400 | Installs rubber grips fitted with a laser sight module. |
Optics (Blackhawk)
Configuration name | Optics | Corresponding base models | Cost () | Description |
---|---|---|---|---|
Iron sights | None | Ruger Blackhawk Ruger Super Blackhawk |
50 | Original iron sights, no optics or mounts. |
Integrated scope | Integrated 2x scope | 1000 | The top of the receiver is drilled and tapped to fit a permanent mount, on which a 2x scope is installed. Not compatible with: Snub-nose and Combat barrel configurations | |
Scope rail | NATO-S mount | 1500 | Installs a barrel-mounted length of rail, sitting onto the top of the receiver and the barrel. Not compatible with: Snub-nose and Combat barrel configurations |
Stock (Redhawk)
Configuration name | Stock type | Other effects | Corresponding base models | Cost () | Description |
---|---|---|---|---|---|
No stock | N | None | Ruger Redhawk Ruger Super Redhawk Ruger Super Redhawk Alaskan |
50 | Original pistol configuration. |
Wire stock | S | Weapon becomes Class 2 Weight +1 tier Weapon category becomes Conventional rifle |
150 | Attaches a fixed metallic wire stock to the grips, providing a rudimentary stock and turning the revolver into a carbine. |
Glock Short Frame (Glock-SF)
(WIP)
Glock Large Frame (Glock-LF)
(WIP)
MP5
(WIP)
AR-15
(WIP) (pistol caliber offerings and RO635 to be dropped from AR-15 family)
AK
(WIP)
Remington 700 (Rem700)
(WIP)
Black Arrow
(WIP)
Customs nomenclature
If you submit a compatible weapon to Maze Customs for a Major mod, and apply at least one modification, that weapon will be renamed to Custom <family>, with "<family>" being replaced by your weapon's corresponding family, even if the resulting combination of modifications would effectively replicate another base model of the same family.
- Example: Peter purchases a rechambering modification for his Colt M1911A1, rechambering it to .40 S&W. This automatically renames his weapon to Custom 1911SS.
You may, of course, choose to rename your weapon to whatever name or nickname you wish. However, in order to clearly signal that this is a user-given name and not any official or semi-official nomenclature, any name given to a weapon by their user should be between quotation marks.
- Example: Peter wants to give his .40 S&W 1911SS pistol a more palatable name. He decides to call it Old Reliable, as this pistol has been with him for a long time. The weapon is therefore renamed to "Old Reliable", with quotation marks.
Notes
- Note 1: Barrel porting is the act of drilling strategically placed holes into the barrel and slide, allowing part of the gases to be vented through these holes, acting as a sort of integrated muzzle brake. However, the expulsion of these gases is also what generates the noise a firearm makes. If there are any openings through which gases (and therefore noise) can escape before reaching the muzzle, it will be loud regardless of what is at the end of the barrel. This is the same principle that prevents revolvers from being suppressed normally (due to the gap between the cylinder and the frame). For all of those reasons, a ported barrel negates the effects of a silencer; in other words, it is possible but pointless to attach a silencer to a ported barrel.